Importance of AVG Antivirus Protection

When your PC behaves strangely like, applications taking longer to launch, computer is running very slow, hard disk becomes inaccessible, etc. it indicates that your system is infected from malicious programs. In such a situation, it becomes necessary to install updated antivirus on your system. You can install any antivirus on your system, provided that you have purchased genuine copy of that antivirus.
Features
AVG antivirus offers many benefits to you like protection against malicious programs, etc. Now, you can do banking, shopping, surfing, searching, chatting, e-mailing, downloading files, etc. without any terror of infection by malicious programs. This antivirus offers you protection against online scammers, hackers, etc. It protects you from phishing attack by securing your confidential information from intruders.
Usability
AVG antivirus 8.5 is integrated with many new facilities, which were absent in its earlier version. You can easily download and install AVG antivirus 8.5 on your system with the following steps:
STEP 1: Download the installation file of AVG antivirus 8.5 on your system from its official website.
STEP 2: When you will be prompted, do not open the file, but click on the “Save” button and select location where it should be stored.
STEP 3: Reboot your computer when installation file gets saved.
STEP 4: Locate the AVG installation file, and double click on it to start its installation.
STEP 5: Follow the instructions in the installation wizard.
STEP 6: Enter your license number when prompted.
STEP 7: Restart your computer when prompted by the installation wizard.
After completing the installation process of AVG antivirus 8.5 on your system, you can protect your system from malicious programs.
Limitations
You can face blue screen error while installation of AVG antivirus. It can freeze your system and would not be able to work with some of the applications installed on your system.

Firewall Configuration

A firewall is a device or a set of devices, which can be implemented in any of the hardware, software or both. All the messages passing through the firewall are verified to meet some level of security criteria.

It acts as a computer security barrier, which analyzes all the incoming and outgoing traffic to and from your computer or network based on the firewall settings. There are some common types of firewalls like: Application level gateway, Packet filtering firewall, Circuit gateways and Hybrid firewall.

Application level gateway firewall works on the application layer of the protocol stack. It works more intelligently than the packet filtering firewall. Packet filtering firewall examines the information contained in the header of the message packets.

There are some factors based on which the filters can be added or removed from the firewall:

1. IP address

2. Ports

3. Protocols

IP address: Every computer connected to Internet has a unique IP address. The firewall configuration can be customized to block any IP address so that your computer will not allow any kind of communication to take in between.

Ports: The firewall can be configured to allow or block messages from any port number.

Protocols: There are some commonly used protocols like IP, HTTP, TCP, FTP, and SMTP etc., which can be included in the firewall filter.

Some operating systems, such as Microsoft Windows offer built-in firewalls that are turned on by default to block all the incoming threats from Internet. There are several other third party firewalls available. You can choose any one the firewall to replace the default firewall in Windows.

Computer System Optimization & Security

Computer optimization can be understood as the vital tonic to boost up the system. It has become the major area of concern for the users. Many computer support firms are making campaign for computer optimization. They are making use of troubleshooting techniques and implantation of third party software to resolve the issue.
I will concentrate this blog to resolve some general issues. Unfortunately you may face issues where your screen freezes and programs stop responding. Even you are unable to close the windows of some application. This is the disgusting situation. The reason behind could be scarcity of RAM, infection of virus or fault in windows registry.
Notice the time of the freezing, in majority of the cases your system will be able to restore the normal condition by default without any attempt. But if the things are not in favor bring out the Task Manager utility with simple keyboard activity: Press the ‘Alt’, ‘Ctrl’ and ‘Del’ buttons all at the same time. You would land to a Window format, now scroll down the program which is causing the error and choose to end the program. Now, again you can start the program and get the normalcy.
Note: Lower value of RAM is the prime reason behind hence to avoid regular repetition you may upgrade the RAM.
However, you may not be lucky every time. If the concern is not addressed with the Task Manager then the root cause may be virus infection or corruption of Windows registry.
If you don’t have any compatible anti-virus, than opt for the best one available in the market. Some trusted names includes, McAfee, Bitdefender, Kaspersky and so on. Before making download, make sure that they are compatible to your windows platform. The role of the anti-virus program is to scan and remove any virus, spyware, malware, keyloggers, rootkits and so on and do the computer optimization.

Many independent software are available for computer optimization which can fix, Error messages, slow performance, slow internet browsing and many more within few minutes. Some of the best are RegCure PC optimizer, XoftspySE.

Windows 7 Guide

Have you ever thought that how much control should users have over their own desktops? This is a frequently asked question that data center administrators especially those in small to medium sized enterprises have been asking ever since Windows Vista started shipping.

The major issue: With User Account Control features, end users are stuck in an uncomfortable middle ground. They are not able to install programs they really need without administrative privileges, and yet having those administrative rights means they can install anything, including applications that leak private business data and other malware that slow productivity.


Windows 7 is the successor to Windows Vista, an OS release that promises to fix most of the major annoyances in Vista without adding any major new features.

New UAC slider controls are developed to alleviate the tedium of access control a feature that, in Vista, became a major letdown. One of the prime offenders is Apple iTunes, which prompts users umpteen times to approve the installation. In Windows 7, these prompts will be customizable: You will only get an alert when a software install affects the system Registry or when the application was downloaded from the Internet.


The UAC tool in Windows 7 are no cause for alarm, because there’s a way of dealing with the features in Vista and in Windows 7: Offload the security practices to another software agent to manage administrator accounts. This best of both worlds approach means the end user can install applications as needed, but is blocked from installing harmful software, and the end user does not have to manage his own security access at all.

One of the USP of Windows 7 is the more flexible and less irritating User Account Control. Microsoft has reduced the actions that prompt you making it less annoying for the users. The software giant has made several changes, but the biggest change is the User Account Control “slider” setting which results in less annoyance and more security.

There are now four customization settings for UAC:
1. Never notify (Less secure): The user is not notified when an application tries to install software or make changes to the PC. The user is not notified when they make changes to Windows settings or when programs try to do so.
2. Only notify me when programs try to make changes to my computer: The user is not notified when an application tries to install software or make changes to the computer. The user is not informed when they make changes to Windows settings. However, the user is notified when programs try to make changes to the computer, including Windows settings.
3. Always notify me: The user is always notified when an application tries to install software or make changes to the computer. Windows informs you when they make changes to Windows settings or when programs try to do so.
4. Always notify me and wait for my response (most secure): The user is notified when an application tries to install software or make changes to the computer. The user is also informed when they make changes to Windows settings or when programs try to do so.

Computer Support Within No Time

There are some things which are more irritating than having to deal with an infected computer. Erroneous software, accidental virus & spyware, error codes and hardware defaults can contribute to this frustration. From the business ambience to individual home computer user, every computer enthusiast needs a quick and affordable resolution to come out of technology dilemmas.

With online computer help and Support resources, you can have a remedy to a multitude of irksome technology errors. These online services are available for 24/7. Most computer problems can be addressed remotely by connecting directly to your computer via the Internet as well as over the phone. These computer technicians take you through the step-by-step process which helps you as a computer owner to get acquainted with the intricacies of your machine.

You can only avail remote computer support only if you have an Internet connection. As opposed to this, you can consider availing live support over the phone where you will have to perform everything as suggested by technicians. Online computer support comes with 'No Fix No fee' policy which means that you don't have to pay if a technician fails to troubleshoot your computer problems.

All these technicians are highly qualified and take proper care to not to leave any loose end for customers to complain. With online vendors, you get both quality and expertise on hand. This is known as getting real value of your money.

Another advantage of availing online computer support services is their round the clock availability. You can call these techs from anywhere anytime. Moreover, you get everything done in the convenience of your own premises; be it office or home. This eliminates a need for you to haul your computer to any outside computer repair showroom or call any expensive technician to have your PC back to life.

Online microsoft tech support technician offers quick and reliable computer service and repair at a reasonable price. Furthermore, you can receive free phone advice about your computer problem and any other questions that you may have. Simply call them at their toll free number and get quick resolution for your technical problems.


Source: http://EzineArticles.com/?Computer-Support-Within-No-Time&id=1517533

How to Lock Out Unwanted Guests in Windows Vista

If you share your computer with others (and even if you don't), Windows Vista includes a neat way to keep unwanted guests from guessing your system administrator password. When you set up users and declare one user as administrator (with full privileges), Windows Vista allows outsiders unlimited guesses at the password you chose. Here's how to limit the guesses.

This post provide Windows Vista Support to Lockout Unwanted Guests in Windows Vista for your computer security.

F0llow the Steps

• Click Start, type Local Security Policy.
• Click Account Lockout Policy.
• Choose Account Lockout Threshold.
• At the prompt, enter the number of invalid log-ins you'll accept (say, 3).
• Click OK and close.

IYogi Press Release: iYogi Acquires Clean Machine Inc.

New York, NY, May 11th, 2009 : iYogi, a global direct to consumer and small business remote technical support provider, today announced it’s acquisition of Clean Machine Inc, a provider of remotely administered PC security and performance management services. Clean Machine will operate as a separate brand under the iYogi services umbrella along with the recently lunched Support Dock (www.supportdock.com) and its comprehensive range of 24/7 technical support services for computers, printers, MP3 players, digital camera, routers, servers and more than 100 software applications. Larry Gordon, Founder of Clean Machine is appointed as the President of Global Channel Sales for iYogi.

iYogi will integrate technology and innovation that Clean Machine Inc. has developed for delivering an enhanced service experience by proactively managing the health and security for PC's and Apple Computers. This acquisition also broadens iYogi's access to key markets through Clean Machine's existing partnerships. Larry Gordon's past experience and successful track record will accelerate iYogi's expansion through his focus on global alliances.

Commenting on the acquisition of Clean Machine Inc., Uday Challu, CEO & Co-founder of iYogi, said,

"This acquisition will help iYogi to enhance our customer experience and extend our market reach to the millions of consumers that are challenged by the increasingly complex technology environment. Clean Machine's proactive maintenance and management of PCs in home and small business environment will be our launch platform for building the next generation of managed services for consumers."

"We are delighted to have Larry spearheading partnerships and global alliances for iYogi. His incredible experience in marketing, sales and building global alliances will help forge partnerships with retailers, multiple service operators, software publishers, original equipment manufacturers (OEM) and other such companies that are at the frontlines for managing tech support issues for consumers and small businesses",

added Challu.

With more than 20 years of experience, Larry Gordon has played a variety of strategic roles in marketing, sales and building alliances. Larry was the Executive Vice President at Capgemini and Kanbay. He was also VP of Global Marketing for Cognizant (Nasdaq: CTSH), a leader in global IT services and Director of Marketing for New York based Information Builders.

"I am excited to join a company that shares a common mission to Clean Machine in creating a global brand for delivering the best technical support to consumers and small businesses. We also share a common approach of utilizing highly skilled talent with leading edge tools, thereby delivering services at incredible price-points, with high margins for our partners",

said Larry Gordon, the newly appointed President of Global Channel Sales at iYogi.

ABOUT IYOGI

Headquartered in Gurgaon, India with offices in New York, USA, iYogi provides personalized computer support for consumers and small businesses in United States, United Kingdom, Canada and Australia. IYogi's 24/7 phone and remote technical assistance, spans across a comprehensive range of technologies we use every day from a wide range of vendors. Utilizing its proprietary technology iMantra , and highly qualified technicians, iYogi delivers amongst the highest benchmarks for resolution and customer satisfaction. iYogi is privately held and funded by SAP Ventures, Canaan Partners, and SVB India Capital Partners. iYogi was recently awarded the Red Herring Global 100 Award, recognizing it as one of the 100 most innovative private companies driving the future of technology. For more information on iYogi and a detailed list of technologies supported, visit: www.iyogi.ca.

ABOUT CLEAN MACHINE

Clean Machine Inc. is a NJ-based and incorporated company that helps consumers and small business owners easily manage and protect their computing environments safely and cost effectively. The company is has a unique, powerful and inexpensive PC concierge service. Specifically, each customer is assigned a highly-trained tech concierge who remotely examines their computer system on a scheduled and very secure basis. The PC concierge will immediately fix software-based problems and prevent new threats to the customer's computing environment including offensive pop-ups, browser redirects and slow performance, and then provides a detailed report. Clean Machine's proprietary Radar(TM) technology (Remote Access Detection Audit and Repair) allows its expert technicians to remotely resolve any problems, eliminating the need for customers to go through the frustrating process of speaking with a tech support expert, and still having to do the work themselves. In other words, the Clean Machine PC concierges do it all. For more information on Clean Machine please visit www.pccleanmachine.com.

CONTACT:

iYogi Contact
Vishal Dhar
President Marketing
iYogi Inc.
Phone: 212 229 0901
Email: vishal@iyogi.net

The Press Release is available at its source: iYogi acquires Clean Machine Inc.

Fix Invalid Disk Error

Operating system facing problems but not every body know about computer troubleshooting, which they have not troubleshooting tips they need to computer support for troubleshooting. This post provide further information about Fix Invalid System disk Error.You may also receive this error message when you start your computer by using a Windows Startup disk, or you may receive the following error message:

This version of Windows does not run on DOS 7.0 or earlier.

This issue can be caused by any of the following conditions:

* Your computer may be infected with a boot-sector virus such as the AntiCMOS.A virus.
* Your computer is running an anti-virus program.
* Your computer is using hard disk management software (such as Disk Manager, EZ-Drive, or DrivePro) for hard disk geometry translation. These tools provide support for large hard disks (more than 1024 cylinders) when your computer's Basic Input/Output System (BIOS) does not support large hard disks.
* Windows Setup was unable to copy the system files to the hard disk.
* Security software has disabled access to drive C.

To fix this issue use one of the following

Computer Is Infected with a Virus
Use an anti-virus program to detect and remove the virus, and then reinstall Windows. Boot-sector viruses infect computers by copying information either to the boot sector on a floppy disk or the partition table on a hard disk. During startup, the virus is loaded into memory. Once in memory, the virus typically infects any non-infected disks that your computer is connected to.

Computer Is Running Anti-Virus Software
Start your computer by using the Windows Startup disk you created during Windows Setup, and then use the sys command from the Windows Startup disk to restore the system files to the hard disk.

Some computers use built-in anti-virus software that must be disabled in the computer's BIOS. For information about how to change settings in the BIOS, view the computer's documentation or contact the manufacturer of your computer.

Computer Is Using Disk Management Software
In some cases, Windows may not properly detect that you are using disk management software and may overwrite the master boot record (MBR) information. Refer to the documentation for the disk management software you are using for information about restoring the MBR.

Also, check the Setuplog.txt file for the following statement:
FSLog: BIOS Heads=:64:, BootPart Heads=:64:
The preceding number (64 in this example) may vary from computer to computer. If these two numbers are different, replace the system files on your hard disk according to the instructions in the following "Reinstall the Windows System Files" section. For additional information about how to determine if your computer is using a drive overlay program


Reinstall the Windows System Files
WARNING: If you are using Disk Manager or any other disk drive overlay program on a hard disk, make sure that the overlay driver is loaded before you use the sys command on that hard disk. If the overlay driver is not loaded and you use the sys command on the hard disk, the drive may not be recognized as being partitioned by the disk drive overlay program and you could experience loss of data or an inability to boot from the drive.

Although you can use the sys command with Ontrack Disk Manager and later versions of MicroHouse EZ-Drive (or EZ-Max) after the overlay driver is loaded, earlier versions such as EZ-Drive 2.01s require that operating system files be copied to the overlay installation disk and installed by the overlay utility. In such cases, the overlay may be damaged if you use the sys command on the hard disk.

1. Start your computer by using the Windows 95 or Windows 98 Startup disk.
2. At the command prompt, type the following commands, pressing ENTER after each command:

c:
cd\windows\command
attrib c:\msdos.sys -s -h -r
copy c:\msdos.sys c:\msdos.xxx
a:
sys c:
attrib c:\msdos.sys -s -h -r
del c:\msdos.sys
copy c:\msdos.xxx c:\msdos.sys
attrib c:\msdos.sys +s +h +r
3. Remove the Windows Startup disk, and then restart the computer.

Security Software Enabled
Some third-party programs prevent (lock) access to hard disks in your computer. If this software is installed, contact the manufacturer about how to remove this software and safely restart Windows 98 Setup. For additional information about Windows Setup and troubleshooting

Computer Technical Support By iYogi Technical Services

iYogi provides next-generation, personalized remote computer support services for consumers and small businesses. Live 24/7/365 support coverage extends to technologies that we use everyday. iYogi’s comprehensive support coverage spans across 72 desktop software applications, servers, hardware devices, printers, peripherals, routers and modems.

iYogi was founded by a highly experienced team passionate about raising the bar on service quality. iYogi's customer approval rate of 93% and resolution rate of 87% are amongst the highest published benchmarks in the computer support industry.

With over 550 employees and growing, iYogi’s strategy has been to hire the best talent from major brands like Dell, HP, Microsoft and IBM. iYogi’s three-month training program across multiple technology platforms also focuses on listening, communications and Microsoft certification.

iYogi combines superior talent with proprietary technology (iMantra) to deliver the best technical support service at an incredible price-point. iYogi’s knowledge database, iMantra, grows with every interaction by documenting the problem, its solution and the specifications of the computer hardware, software and all peripherals. iYogi's personalization engine captures the customer's demographic information and his/her behavioral profile.

Every time a contact is made with iYogi the technician references the history of incidents and the customer’s profile to deliver a faster service that is personalized. Enabling less-than-one-minute connectivity with technical specialists and with the ability to schedule a session with a preferred technician, iYogi provides the best technical support experience.

Currently available to customers in United States, United Kingdom and Canada, iYogi is aggressively expanding to several new geographies across the globe. Its next generation of service will include a PC dashboard for PC recovery, anti-virus/spyware, data back-up and PC optimization.

How to manually Remove BHOs

Warning Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall your operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

You can identify a spyware program that is loaded by using BHOs. To do this, you can use the Microsoft system configuration utility (Msconfig.exe) and the Microsoft system information utility (Msinfo32.exe).

BHOs are Component Object Model (COM) components that Microsoft Internet Explorer loads whenever it starts. BHOs run in the same memory context as the browser. BHOs can perform any action on available windows and modules.

To manually remove BHOs, follow these steps:

1. Click Start, click Run, type regedit , and then click OK.

2. Locate and then double-click the following registry subkey:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Browser Helper Objects

3. Under the Browser Helper Objects key, you may see ClassIDs (CLSIDs) that have a format that is similar to the following:

{XXXXXXXX - XXXX – XXXX – XXXX – XXXXXXXXXXXX}

Note CLSIDs are 128-bit numbers in hexadecimal notation that are enclosed in a pair of braces.

4. Note the CLSID.

5. Locate and then click the following registry subkey:

HKEY_CLASSES_ROOT\CLSID\{ CLSID }\InprocServer32

Note { CLSID } is the CLSID that you noted in step 4.

6. In the right pane, double-click (Default).

7. Click Value data to see the path of the .dll file. The path may be similar to the following:

C:\Windows\ Program_Name .dll

Note Program_Name can be a spyware program or a legitimate program that is using a BHO.

8. If Program_Name is not a recognized or legitimate program, unregister the .dll file, and then remove the { CLSID } subkeys. To do this, follow these steps:

a. At a command prompt, type the following command to unregister the .dll file:
regsvr32 -u Path \ Program_Name .dll

Note Path is the path of the Program_Name .dll file that is contained in the Value data box in step 7.

b. Locate and then delete the following { CLSID } registry subkeys:

• HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Browser Helper Objects\CLSID\{ CLSID }

• HKEY_CLASSES_ROOT\CLSID\{ CLSID }

Note { CLSID } is the 128-bit number that you noted in step 4.

9. Exit Registry Editor.

10. Restart the computer

More Available Search:
General causes of “STOP 0×0000007F” errors
How to enable cookies
computer repair
Install standard VGA compatible driver

How to Configure Device Manager

This Post describe and provide computer repair help for how to Configure Device Manager to Display Detailed Information. If you require additional device information that is not typically displayed in Device Manager, you can configure Device Manager to show detailed information.

To configure Device Manager to show details:

1. Click Start, click Run, type cmd.exe, and then press ENTER.
2. Type set DEVMGR_SHOW_DETAILS=1, and then press ENTER.
3. Type start devmgmt.msc, and then press ENTER. In Device Manager the properties for a device should now provide a Details tab that contains additional information about the device.

You can view the Details tab to see the following device information:

* Device Instance ID
* Hardware IDs
* Compatible IDs
* Matching Device ID
* Service
* Enumerator
* Capabilities
* Devnode Flags
* Config Flags
* CSConfig Flags
* Ejection Relations
* Removal Relations
* Bus Relations
* Device Upper Filters
* Device Lower Filters
* Class Upper Filters
* Class Lower Filters
* Class Installer
* Class Coinstallers
* Device Coinstallers
* Firmware Revision
* Current Power State
* Power Capabilities
* Power State Mappings

NOTE: Not all of these properties will be populated for a given device. In other words, although all of these properties are listed, some may not contain information when viewing a particular device.

Add or Remove a Windows Component in Windows XP

After Windows XP is installed on your computer, you can use the Add or Remove Programs tool in Control Panel to add a Windows component that was not included in the original installation, or to remove an existing Windows component that you no longer require. This post give computer help tips for add or remove program in windows XP. Follow the steps given below:

How to Add a Windows XP Component

1. Log on as Administrator or as a member of the Administrators group.
2. Click Start, click Control Panel, and then double-click Add or Remove Programs.
3. Click Add/Remove Windows Components. The Windows Components Wizard starts.
4. In the Components list, click to select the check box that is next to the component that you want to add. If the check box for a component is shaded, only some of its subcomponents are selected for installation.

To view a list of the subcomponents, click Details. Click to select the check box next to the subcomponents that you want to add, and then click OK. If the Details button is unavailable, the component does not contain subcomponents.

5. Click Next.
6. If the Insert Disk dialog box appears, use one of the following methods:
o Insert your Windows XP CD-ROM into your CD-ROM or DVD-ROM drive, and then click OK.
o Click OK to locate your Windows XP installation files. In the Files Needed dialog box, click Browse, locate your Windows XP installation files, and then click Open. For example, the installation files might be in the D:\I386 folder.

7. In the Completing the Windows Components Wizard screen, click Finish.

How to Remove a Windows XP Component

1. Log on as Administrator or as a member of the Administrators group.
2. Click Start, click Control Panel, and then double-click Add or Remove Programs.
3. Click Add/Remove Windows Components. The Windows Components Wizard starts.
4. In the Components list, click to clear the check box next to the component that you want to remove.
Note that a shaded check box next to a component indicates that only some of its subcomponents are installed.

If you want to remove a subcomponent, click Details. Then, click to clear the check box next to the subcomponents that you want to remove, and then click OK.
5. Click Next.
6. In the Completing the Windows Components Wizard screen, click Finish.

How to manually optimize the memory usage

Through this post get computer help canada for how to optimize memory uses. You can optimize your computer's memory usage to reflect your specific needs. If your computer is used as a workstation instead of as a server, you can increase performance by devoting more memory to your programs. Your programs will work faster and the system cache size will remain the default size that was included with Windows XP. Or, you can set aside more computer memory for a larger system cache if your computer is used primarily as a server, or if you use programs that require a large system cache.

Follow the steps:

1. Click Start, click Run, type sysdm.cpl in the Open box, and then press ENTER.
2. Click the Advanced tab, and then under Performance click Settings.
3. Click the Advanced tab, and then under Memory usage use one of the following methods:
o Click Programs if you use your computer primarily as a workstation instead of as a server. This option allocates more memory to your programs.
o Click System cache if your computer is used primarily as a server or if you use programs that use a large system cache.
4. Click OK to save preferences and close the dialog box.

How to fix UNMOUNTABLE_BOOT_VOLUME (STOP 0x000000ED)

This post help if you are not comfortable with advanced troubleshooting, you might want to ask someone for help or contact for computer support. This error occur during when you first restart your computer upgrade to windows XP or when you start windows XP you may receive the following error massage STOP 0x000000ED (0xaaaaaaaa, 0xbbbbbbbb, 0xcccccccc, 0xdddddddd) UNMOUNTABLE_BOOT_VOLUME

Some technical information about error given below

In this section provides some information about technical background about this error. This behavior occur when following condition is true

• Your computer uses an Ultra Direct Memory Access (UDMA) hard disk controller, and the following conditions are true:
o You use a standard 40-wire connector cable to connect the UDMA drive to the controller instead of the required 80-wire, 40-pin cable.
o The basic input/output system (BIOS) settings are configured to force the faster UDMA modes.
• The file system is damaged and cannot be mounted.
The purpose of this error message is to prevent the following two things:
• Potential data loss caused by using an incorrect IDE cable for the faster UDMA modes. An IDE cable is a kind of cable used to connect storage devices, such as hard disks, inside a computer.
• Continued access to a drive on which the file system is damaged

Resolution of the error

For resolve this problems follow two methods given below:

Method 1: Repair the volume

Note the second parameter (0xbbbbbbbb) in the error message. You might have to regenerate the error in order to write it down.

If the second parameter (0xbbbbbbbb) of the Stop error is 0xC0000032, the cause of the error is that the file system is damaged. You can try to repair the volume to see whether this resolves the error. If the second parameter is not 0xC0000032, see "Method 2: Check the IDE cable and load Fail-Safe settings" for help.

Some things that you should know before you try this solution

• If the file system is damaged, you can use chkdsk /r command to repair the volume. However, if you use the chkdsk /r command, you may lose some data.
• You will need the Windows startup disks or the Windows installation disk. If you do not have them, contact the computer manufacturer for help in obtaining the disks.
• You will need the administrator password to complete the steps.
To repair the volume, follow these steps:
1. Start your computer by inserting the Windows startup disks or the Windows installation disk if your computer can start from the CD drive.
2. When the Welcome to Setup screen appears, press R to select the repair option.
3. If you have a dual-boot or multiple-boot computer, select the Windows installation that you want to access from the Recovery Console.
4. Type the administrator password when you are prompted to do this.
Note If no administrator password exists, press ENTER.
5. At the command prompt, on the drive where Windows is installed, type chkdsk /r, and then press ENTER.
6. At the command prompt, type exit, and then press ENTER to restart your computer.
7. After you repair the volume, check your hardware to isolate the cause of the file system damage.
If this procedure does not work, repeat it, but type fixboot instead of chkdsk /r in step 5.

If you are still unable to resolve the issue, please see the "Next steps" section for help.

Method 2: Check the IDE cable and load Fail-Safe settings

If your computer uses a UDMA hard disk controller, try these steps. If your computer does not use a UDMA hard disk controller, see the "Next steps" section for help.

• If your UDMA hard disk is connected to the controller with a 40-wire UDMA cable, replace the cable with an 80-wire cable.
• In the BIOS settings for your computer, load the 'Fail-Safe' default settings, and then reactivate the most frequently used options, such as USB Support.
If you are not sure how to follow these steps, contact the manufacturer or refer to the user’s guide that was included with your hardware.

How to back up and restore the registry in Windows

In this section we discuss about windows registry. Here all things related to how to take back-up in windows Operating system. You can manually get backup and restore windows registry. Follow the steps to Manual steps to back up the registry in Windows Vista or XP.

Steps for Windows Vista
1. Click Start
, type systempropertiesprotection in the Start Search box, and then press ENTER.
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
2. Wait for Windows to search for available disks and most recent restore points. In the System Properties dialog box, on the System Protection tab, click Create,
3. Type a name for the restore point and then click Create.
4. After the restore point has been created successfully, click OK two times.
Note If System Restore is turned off, click to select the local disk, click Apply and then click Create.
Steps for Windows XP
1. Click Start, click Run, type %SystemRoot%\system32\restore\rstrui.exe, and then click OK.
2. On the Welcome to System Restore page, click Create a restore point, and then click Next .
3. On the Create a Restore Point page, type a name for the restore point and then click Create
4. After the restore point has been created, click Close.
Note If System Restore is turned off, you receive a message that asks whether you want to turn on System Restore now. Click Yes. Then, in the System Properties dialog box, click to clear the Turn off System Restore check box, click OK, and then repeat this step.